Your Luminette
How to use Drive ?
Drive is very easy to use. You should use it during your morning ride for 20 minutes. Please follow the steps below before the first use.
Your device:
Drive
1
Charge the device for 2 hours before first use
- Connect the type-C connector of the cable to the specified location on your Drive and connect the other standard USB connector to the charger port.
- Plug the charger into the cigarette lighter port of your car.
- When the device is fully charged disconnect the cable from the device.
2
Affix the elastic band on your sun vizor
3
“Clip” the device onto your sun visor using the magnetic clip
4
Measure the distance between the device and your eyes in order to determine the appropriate light intensity
5
Turn on the device by holding on/off button briefly and select the right intensity
|
distance < 10cm 10-20 cm > 20 cm |
intensity 1 2 3 |
6
Adjust the angle of the device so that the light is directed to your eyes
7
After 20 mins device will blink and automatically shut down
To turn off your Drive in the middle of a session, hold down the On-Off button (for 2 seconds).
Repeat all these steps the next day.
